Ridge Vault Skylights
|
|
Ridge Vault Skylights |
 |
 |
 |
 |
|
 |
||||||||||
 |
Series MCRV Continuous Ridge Vault Skylights Flat Vertical Ends
Sloped Ends
|
|||||||||
|
||||||||||
|
||||||||||
|
Mac Continuous Ridge Vault Skylights are similar to Mac Continuous Barrel Vault
Skylights, except that Ridge Vaults are sloped and Barrel Vaults are curved. The
aluminum framing members are most commonly spaced at 36 inches (915mm), 48
inches (1219mm) or 60 inches (1524mm) on centre. Because of their modular
construction, they are available in virtually any length or width. Smaller units
are supplied fully assembled, while larger units may consist of prefabricated
components to be assembled on site. They may be manufactured at almost any
slope; large, low sloped units may require additional structural support.
Mac Continuous Ridge Vault Skylights may be supplied with vertical or sloped end glazing panels, or these panels may be absent to permit installation on the ridge of a roof. Small Ridge Vault Skylights may be supplied with glazing panels formed at the centre ridge and/or molded sloped ends. Molded sloped end panels are available only at a 30 degree slope, and to a maximum of 96" (2438mm). Medium and large Ridge Vault Skylights are manufactured with aluminum members at all ridges. Ridge Vault Skylights may be modified to suit specific applications, including solariums, greenhouses, walkway enclosures, entrance canopies, etc. |
||||||||||
 |
||||||||||
 |
||||||||||
|
||||||||||
